How to install a fishing tent?

There is a high chance of tent poles breaking. Except for a very small number of light poles stepping on the ground or encountering extremely bad weather, they are basically caused by improper use. The main reason for not using it properly is that the poles and poles are not fully inserted. What should I pay attention to when setting up a tent? Rooftop tents, especially newly bought tents, must be tried at home to see if there are any problems, including whether the tent fabric is damaged or missing parts, etc., so that you will not encounter trouble when camping, you can take it with you Carry some with you. .Fragile spare parts, just in case; do not get close to the water surface to avoid the water level rising. Do not go under the cliff to avoid falling rocks. Do not in high convex places, avoid strong winds. Do not go under a lone tree to avoid electric shock. Do not hide from snakes and insects in grass and bushes. The ideal camp site should be dry, flat, with good visibility, access up and down, sheltered drainage, and easy access to water. So how to install a fishing tent?

1. Choose a place with relatively flat terrain to set up an outdoor tent, the ground should be cleaned, put the inner tent on the ground, take out the folded tent pole, straighten it segment by segment, connect the long pole, and then place it on the tent according to the method in the manual. When erecting tent poles, the bridging method is generally used.
2. After the two support rods are worn, one end of each support rod can be inserted into the small hole in the corner of the tent, and then two people cooperate, hold the two ends respectively, and push the support rod inward to make the tent arch. Knowing to put other connectors into the small holes. Once inserted, the tent is basically formed. Of course, this is just a rough outline. If you want stability, you’ll need to tie the intersection of the tent poles to your body. , and then think about the direction of the door, you can use ground nails to hook the four corners of the tent into the picture and fix it. It should be noted that the bottom of the tent must be supported so that the entire tent will bulge.

3. It’s finally time to install the external account. Put an internal account into an open external account. It should be noted in this step that the doors of the inner and outer accounts should be unified. Otherwise, you will not be able to enter. Correspond to the four corners of the tent and hang it up. In some tents, the four corners of the outer tent are also nailed to the four corners of the inner tent. Check the outer tent for loops that can be nailed to the ground. It is protruding and has a certain distance from the inner tent, because the inner tent will not get wet when it rains. In addition, there is a layer of dew or frost on the outer tent in the morning. There is some space to keep it from getting the tent wet.
4. Don’t think that with the above three steps, the tent is ready, and there are some ropes outside the tent. Of course, the rope exists for a reason. The rope is used to strengthen the tent, but there is no strong wind to use it, but for people like me who are unsafe and can’t sleep without pulling the rope, it is better to pull it up. In case the weather turns cold at night, the rope is also a ground peg. It’s not difficult to pull the body, just pull it well.

We are a tent factory, producing roof tents, camping tents, pop-up fishing tents and awnings and other products, support OEM and ODM orders, welcome to inquire!